Trade Agreements Act

On March 7, 2024, the Department of Transportation’s (“DOT”) Federal Highway Administration (“FHWA”) announced a proposed rule to rescind a longstanding general waiver of Buy America requirements for manufactured products (the “Manufactured Products Waiver”).  If finalized, this would be a major change for the agency, reversing a policy that has been in place for more than 40 years.

FHWA has imposed Buy America requirements for domestic iron and steel on its projects since 1978 (see 23 U.S.C. § 313; 23 CFR § 635.410), but in 1983, the agency determined that it was in the public interest to waive the requirement as to manufactured products based on the agency’s belief that manufactured products were not used in federal highway projects in sufficient quantities to have an effect on the overall cost of a project and therefore did not require Buy America protections.  That general waiver has been in place ever since.

This change in policy comes in the wake of the 2021 Infrastructure Investment and Jobs Act’s Build America, Buy America (“BABA”) provisions, which expanded Buy America coverage broadly in federal financial assistance programs for infrastructure.  BABA requires that all steel, iron, construction materials, and manufactured products used in such products be “produced in the United States.”  BABA also discourages the use of general applicability waivers like FHWA’s Manufactured Products Waiver and required review of existing waivers. 

FHWA sought comments on its longstanding manufactured products waiver in March 2023 and received over 9,400 comments from the public.  Commenters included manufacturers, labor organizations, construction contractors, industry associations, State departments of transportation, and even members of Congress.  Based on a consideration of this feedback and in recognition of other domestic content policies, including Executive Order 14005, “Ensuring the Future Is Made in All of America by All of America’s Workers,” FHWA is proposing to discontinue its Manufactured Products Waiver and modify its regulations to include domestic content requirements for manufactured products.Continue Reading Federal Highway Administration Announces Proposed Rule Ending Longstanding Buy America Waiver for Manufactured Products

On December 30, 2021, the FAR Council issued a final rule to update the trade agreements thresholds implemented under the Trade Agreements Act (“TAA”).  The new thresholds take effect January 1, 2022.

The TAA thresholds are adjusted every two years and set the value a contract must meet or exceed in order for the World Trade Organization Government Procurement Agreement (“WTO GPA”) and free trade agreements (“FTAs”) to apply.  For supply, service, and construction contracts that meet or exceed the stated thresholds, Buy American Act (“BAA”) requirements are waived in accordance with the TAA, and the Government is required to treat eligible products and services from designated countries on an equal basis as domestic products and services.

The updated thresholds, to be listed in FAR 25.402(b), are provided below.Continue Reading New Trade Agreements Act Thresholds Take Effect January 1, 2022

Under the January 2021 “Made in America” Executive Order 14005, President Biden established a new Made in America Office to oversee and administer domestic preference requirements in federal procurements.  Housed within the Office of Management and Budget (“OMB”), the Made in America Office was tasked with, among other things, reviewing and approving agency waivers of any Made in America Laws—including, for example, waivers of the Buy American Act (“BAA”) and Trade Agreements Act (“TAA”), as well as developing a publicly available website to post the descriptions of the proposed waivers and justifications for each.  Last week, the Made in America Office launched its new website, establishing for the first time a centralized, government-wide database of all proposed waivers of Made in America Laws.
Continue Reading The Made in America Office Website Is Live

Last month, the Biden administration released its report on the results of its 100-day review of U.S. supply chains for critical products:  “Building Resilient Supply Chains, Revitalizing American Manufacturing, and Fostering Broad-Based Growth” (the “Report”).  Alongside the Report’s slate of policy recommendations, the Biden administration also announced immediate actions to strengthen supply chains and stimulate domestic competitiveness.

The Report is the result of President Biden’s February 24 “Executive Order on America’s Supply Chains” (the “Order”), which directed federal departments and agencies to conduct a review of supply chain risks in four critical product areas,[1] including pharmaceuticals and active pharmaceutical ingredients (“APIs”).  The Report and its recommendations further the Biden administration’s broader goal of rebuilding the U.S. industrial base, reducing reliance on foreign competitors, and bolstering national and economic security.

The U.S. Department of Health and Human Services (“HHS”) led the review of the supply chain for pharmaceuticals and APIs, which focused primarily on drugs, in particular small-molecule drugs and therapeutic biological products.  The Report makes a number of recommendations discussed herein that have the potential to impact pharmaceutical companies’ business plans and generate significant opportunities, though many such recommendations are long-term and will require dedicated funding so the actual impact of the Report’s suggestions remains to be seen.
Continue Reading Biden Administration 100-Day Supply Chain Assessment: Insights for Pharmaceutical Manufacturers

The American Rescue Plan, signed into law last month, includes $1.9 trillion in economic stimulus, healthcare, and related funding.  And just last week the Biden administration released an infrastructure proposal, the American Jobs Plan, that includes $2.3 trillion in transportation, connectivity, power, and other critical infrastructure investments.

Contractors are right to view these plans as massive opportunities — but should be cognizant of the regulatory strings that often attach to government spending.  In general, these can include Federal Acquisition Regulation (FAR) and agency-specific FAR supplements for federal procurements, as well as the nonprocurement uniform requirements (2 C.F.R. Part 200) and related agency-specific regulations that attach to Federal grant funds even when disbursed by state or local entities.

Now, some Congressional members are seeking to add new restrictions that would significantly overhaul the existing domestic preference regime for Federal procurements — mere weeks after the promulgation of new Buy American regulations and the release of a new Executive Order to further tighten the application of these rules.Continue Reading U.S. Senators Propose Trade-Pact Waivers Amidst Focus on Domestic Preference Laws

Last week, President Trump issued an executive order aimed at encouraging the expansion American manufacturing of essential medical products — Executive Order on Ensuring Essential Medicines, Medical Countermeasures, and Critical Inputs Are Made in the United States (August 6, 2020) (the “Order”).  The Order sets forth an ambitious plan requiring extensive agency action on a tight timeline that suggests a significant impact.  Closer examination of the Order raises significant questions about the practicalities of implementation and the realistic impact of the Order once the substantial stated exceptions are taken into account.

The List

The heart of the Order is a list of Essential Medicines, Medical Countermeasures (“MCMs”), and Critical Inputs to which the Order’s requirements apply — but the key components of this list do not yet exist.  Instead, the Order directs the Food and Drug Administration (“FDA”) to produce the list within 90 days and to include on the list Essential Medicines, MCMs, and Critical Inputs “that are medically necessary to have available at all times in an amount adequate to serve patient needs and in the appropriate dosage forms.”

The Order provides the following definitions that give some insight into what may be on the FDA’s eventual list:
Continue Reading Trump Administration Increases Uncertainty for Pharmaceutical Manufacturing

On Monday, the U.S. Court of Appeals for the Federal Circuit issued an opinion in Acetris Health, LLC v. United States, No. 2018-2399 (Fed. Cir. Feb. 10, 2020) (“Acetris”), that would permit pharmaceutical manufacturers to source a drug’s active pharmaceutical ingredient (“API”) from India, China and other non “designated countries” and yet still offer the end product for sale to the U.S. Government.  Under the Trade Agreements Act (“TAA”), if a drug’s API was sourced from outside of the United States or a designated country, at least some Government agencies previously had taken the position that the U.S. Government could not purchase it.  In Acetris, the Federal Circuit explained that the TAA inquiry should turn not on where the API (or some other component) is sourced, but instead on where the pill (or other end product) is manufactured.  Consistent with this approach, the court held that a pill manufactured in the United States was compliant with the TAA and implementing regulations even though the pill’s API was sourced from India.

Although the full implications of the Acetris decision are not yet clear, there is no doubt that the ruling alters the TAA compliance landscape and offers broader lessons outside of the pharmaceutical manufacturing context.  Consequently, the decision warrants close attention by contractors seeking to maximize supply chain efficiency.
Continue Reading A New Path to TAA Compliance: U.S.-Made End Products in Acetris

A long-standing dispute over the approach to country of origin determinations under the Trade Agreements Act (“TAA”) may soon be resolved, as the Federal Circuit recently heard oral argument in one of two cases presently examining key aspects of this statute.  Among other questions presented, the court may decide the standard for determining whether a product may be considered a U.S.-made end product — a question that could have far reaching implications for product manufacturers across all industries.
Continue Reading How Much Is Enough? Federal Circuit Appeal May Decide Level of U.S. Manufacturing Required Under the TAA

Last month, GAO released a report analyzing federal agency implementation of the Buy American Act (“BAA”), 41 U.S.C. §§ 8301-8305.  As we have previously reported, BAA enforcement is an area of focus for the Trump Administration, which has repeatedly emphasized the need to “Buy American and Hire American,” including in an April 2017 executive order.  And for government contractors, compliance with the BAA and other domestic sourcing regimes also has been an increasingly common subject of litigation, particularly under the civil False Claims Act, as we have detailed in this space.

In keeping with this Buy American focus, GAO was commissioned to report on (A) the extent to which federal agencies procure non-domestic end products through the use of BAA exceptions and waivers, and (B) the ways in which the government’s largest buyers provide training and guidance to implement BAA requirements.  Although GAO found that only a relatively small percentage of goods purchased were foreign end products, GAO also found that this number could have been misstated due to reporting errors and system limitations.  Moreover, GAO found that the level of BAA training varied significantly among the agencies it canvassed.  GAO’s findings, which are discussed in greater detail below, offer a window into the government’s view of its own compliance with the BAA’s complex and often confusing regulatory scheme.Continue Reading GAO Report Shows That Agencies Buy Only A Small Percentage of Non-American Goods, But Buy American Act Implementation Remains A Challenge

Last month, the Government Accountability Office (GAO) issued a bid protest decision regarding the application of Buy American Act (BAA) requirements to a solicitation for construction.  In this decision, GAO rejected the agency’s determination that an offeror’s bid was nonresponsive because the offeror failed to provide certain required information for the evaluation of a potential BAA exception.  A summary of the decision and our takeaways are below.
Continue Reading Pragmatism Wins the Day in GAO Buy American Protest